For the KG940-type surface dth drilling rig, hydraulic system, carriage parts and travelling unit are optimized and upgraded based on KY140-type crawler-type dth rock drilling rig, so as to make rotary speed and advance rate faster and the reliability better.
For the KG940-type surface dth drilling rig, hydraulic system, carriage parts and travelling unit are optimized and upgraded based on KY140-type crawler-type dth rock drilling rig, so as to make rotary speed and advance rate faster and the reliability better.
Below are the pictures of our Surface DTH Drilling rig KG940A Loading at factorys
Pictures of KG940A rock drilling rig details
Pictures of our mining drilling rig KG940 type
KG940 Compare with KY140
|
Model |
KY140 |
KG940 |
Advantage |
|
Power |
YC4D80(4108) |
YC4D80(4108) |
/ |
|
Carriage parts |
Box iron slide block |
Enhanced carriage of thick liner plate reduces the wear of pressing plate. And the appearance is neater by adopting rubber-tube support chain |
Enhance rigidity and reduce wear. |
|
Walking parts |
Domesticwalking reducer (Hydraulic Brake) |
Imported walking reducer (Hydraulic/machinery dual-brake) |
The gradeability is strong and the braking is reliable, so as to prevent slipping from the slope. |
|
Hydraulic system |
28.2pump |
32-pump, large-drift-diameter new valve group Adopt new type joint; Travelling rocker arm. |
Increase flow, reduce resistance; neat appearance and convenient operation |
|
Pneumatic system |
Ball valve |
Side-valve-type impact air valve |
Great controllability |
|
Rotation speed |
62r/min(1700) |
71/min(diesel 1700r/min；100r/min(diesel2400r/min) |
Improve 14% |
|
Push speed |
530mm/s |
580mm/s |
Improve 10% |
Specifications:
| Model |
KG940A |
KG940D |
KGH6 |
|
Rock hardness |
F=6-20 |
||
|
Hole diameter |
Ф105-165mm |
||
|
Economic Drill depth |
25m |
||
|
Rotating speed |
0-100r/min |
||
|
Rotation torque |
2800N.m |
||
|
Air pressure |
1.0-2.4 Mpa |
||
|
Air Consumption |
12-24m³/min |
||
|
Lifting capacity |
22000N |
||
|
Propulsion Type |
Hydro-Cylinder-Chain |
||
|
Push Length |
3000mm |
||
|
Drill rod size |
Φ76X3000mm/Φ89X3000mm |
||
|
Gradeability |
30° |
||
|
Ground clearance |
320mm |
||
|
Walking speed |
0-2.0km/h |
||
|
Carriage rising angles |
180 |
||
|
Carriage swing angle |
Left100,righ45,total 145 |
||
|
Drill arm Pitch angle |
Blow 50,elevation 25,total 75 |
||
|
Drill arm Swing angle (°) |
Left 44,right 90,total 135 |
||
|
Track level Angle |
±10° |
||
|
Carriage Compensation |
1200mm |
||
|
Engine |
YC-4D80 |
Electric motor |
YC-4D80 |
|
Power |
58KW 2400r/min |
45KW |
58KW 2400r/min |
|
Overall Dimension(L*W*H) |
5355×2215×2365(mm) |
||
|
Total Weight |
6000kgs |
6500kg |
|
|
Note |
Pneumatic –hydraulic driving mechanism |
||
KG dth drilling rig series is revised on the basis of KY surface dth drilling machine series, which maintains the simple structure and stable performance of KY drilling rig series and upgrades the hydraulic system, travelling unit, gyrator, power, gas path system, drill arm component and rack unit, enjoying increased power, stronger climbing ability, more reasonable drilling angle, faster rotation and advancement speed, longer-term motor service life and better reliability. This rock drilling rig is widely used in blasthole drilling of large- and medium-sized open-air mining, water conservancy, power station and road paving projects. Applicable rock hardness: F=6-20, drilling diameter: 80-165mm, economic drilling depth: 12-25m.
