KJ211 is predetermined to be used for mining, preparation work and tunnelling. It is a hydraulic drilling jumbo for independent operation, which can be used for drilling vertical, inclined and horizontal blasthole. Applicable for hard-rock tunnelling operation of 12-35m2 section;
Function and feature
KJ211 is predetermined to be used for mining, preparation work and tunnelling. It is a hydraulic drilling jumbo for independent operation, which can be used for drilling vertical, inclined and horizontal blasthole. Applicable for hard-rock tunnelling operation of 12-35m2 section;
Solid and reliable universal arm is equipped with the best section covering shape, and the propulsion beam can turn over by 360°and level off automatically, so as to be convenient for quickly achieving drilling and positioning.
Meanwhile, the arm can be also used for laterally opening crossdrift and anchor-hold drilling operation.
The arrangement of drill carriage shall ensure the view of the manipulator in good condition.
The arrangement is in balance condition. The strong four-wheel-drive articulated base plate can ensure that the drill carriage is able to travel flexibly, quickly and safely in the narrow roadway.
High-frequency impact jackdrill optimizes the transmission efficiency of impact wave, enhances the drilling rate, reduces consumption of drilling tools and enhances the serviceability rate of equipment by adopting stair piston;
Spacious operation space and a series of automatic functions are conducive for the driver concentrating to safely, quickly and accurately drill.
Each maintenance part has been protected well and shall also be easy to maintain at the same time.
Boundary dimension (including optical auxiliary power station)
Main technical parameters
|
Boundary dimension and weight |
Drilling system |
|||
|
Length |
10000mm |
Rock drill |
1×HC50/R38 |
|
|
Width |
1600mm |
Impact power |
13kW |
|
|
Height |
1850/2650mm |
impact flow |
105L/min |
|
|
Weight |
11000 kg |
Surge pressure |
130bar |
|
|
Running speed (Horizontal) |
10km/h |
The maximum rotary pressure |
150bar |
|
|
Maximum gradeability |
25% |
Frequency |
62 Hz |
|
|
Safety protection |
Torque |
325Nm |
||
|
Noise level |
＜110dB(A) |
Hole diameter |
32-76mm |
|
|
Adjustable security ceiling |
Meet anti-rolling and anti-rockfall requirement |
Turnover of propulsion beam |
360° |
|
|
Drill boom |
Compensative travel of propulsion beam |
1600mm |
||
|
type |
K26F |
drill pipe |
R38-H35-R32-3700 |
|
|
Form |
Automatic level off |
Electric hydraulic power pack |
|
|
|
Flexible drill boom |
1200mm |
Electric motor |
45kW/55kW |
|
|
Wind and water circuit system |
impact-propel-drill boom |
Axial variable displacement piston pump |
||
|
Air compressor |
1×JN5 |
Rotation |
Gear pump |
|
|
Displacement |
0.5m3/min |
Filter fineness |
10μ |
|
|
Pressure |
5-8bar |
Hydraulic oil tank |
240L |
|
|
Shank lubrication device |
Pulse lubrication pump |
Hydraulic cooler |
Water cooler |
|
|
Gas consumption for lubrication |
0.3m3/min |
Operating voltage |
380V |
|
|
Oil consumption for lubrication |
180-250g/h |
Frequency |
50Hz |
|
|
Water pump |
1×CR3 |
Startup method |
Star delta |
|
|
Power |
1.5kW |
Specification of the recommended cable |
3×35+3G6+2×1.5 |
|
|
3×50+3G6+2×1.5 |
||||
|
Pump output |
3m3/h |
|
||
|
Base plate |
|
|||
|
Tail gas clean-up |
Power gas catalyst |
|
||
|
Transmission system |
Four-wheel-drive closed-type travelling system |
|
||
|
Hunting angle |
Swing of rear axle ±6° |
|
||
|
Tire |
300-15 |
|
||
|
Steering mechanism |
Articulated steering |
|
||
|
Travel braking |
Hydraulic brake |
|
||
|
Parking braking |
Multi-disk wet brake |
|
||
|
Diesel engine |
Cummins QSB3.9-C80-31 60KW，2200rpm
|
|
||
