Products
KJ421 Hydraulic Tunneling Drilling Rig
Product Category: Underground Drilling Machine
The KJ421 hydraulic tunneling drilling rig is qualified for the drilling of tunnels whose section falls in the range of 16-68 square meters. It is capable of drilling blast holes and rock bolting in a vertical, inclined and horizontal orientations.
Tel:
+86-371-60981935
Fax:
+86-371-55695853
Mobile phone:
+86-13838197086
E-mail:
[email protected]
Follow us:
Overview
The KJ421 hydraulic tunneling drilling rig is qualified for the drilling of tunnels whose section falls in the range of 16-68 square meters. It is capable of drilling blast holes and rock bolting in a vertical, inclined and horizontal orientations.
Features
- The drill rig is fitted with a flexible boom in two symmetric rectangular coordinates, without any operation blind spots. 360° rotation and self-leveling beam make drill positioning extremely easy. It can also be used for the drilling of lateral cross-cut and rock bolting.
- The drilling rig provides a good view for the operator; balanced layout and the articulated chassis of four-wheel drive ensure the flexible, fast and safe driving in the narrow tunnel.
- The stepped piston is used for the high-frequency impacting rock drill and this can improve the transmission efficiency of impact and drilling speed and reduce the consumption of drilling tools.
- Considerable space and automatic functions enable the driver to concentrate on drilling in a safe, fast and accurate manner;
- All the relevant parts are protected and maintenance is easy.
Parameter
Technical Parameters of KJ421 Hydraulic Tunneling Drilling Rig
| 外形尺寸与重量/Dimensions and weight | |
| 长度/Length | 13000mm |
| 宽度/Width | 2200mm |
| 高度/Height | 2400/3100mm |
| 重量/Weight | 约22000kg/Appr.22000kg |
|
行驶速度（水平） Tramming speed on flat ground |
10km/h |
|
最大爬坡能力 Maximum climbing capacity |
25%（14°） |
| 安全防护/ Safety protection | |
| 噪音水平/Noise level | ＜100dB(A) |
|
可升降安全顶棚 Lifting safety roof |
符合防滚翻防落石要求 Meet the requirements of FOPS and ROPS |
| 钻进系统/Drilling system | |
| 凿岩机/Rock drill | 2×HC95LM |
| 冲击功率/Impact power | 21kW |
| 冲击流量/Impact flow | 100-120L/min |
| 冲击压力/Impact pressure | 180-200bar |
| 冲击频率/Impact Frequency | 54-62Hz |
| 扭矩/Torque | 764Nm |
| 推进梁翻转/Beam rotation | 360° |
| 推进梁补偿行程/Feed extension | 1600mm |
| 钻臂型号/Model of drill boom | K40 |
| 钻臂形式/Form of drill boom | 自动持平/Self-leveling |
| 钻臂伸缩/Boom extension | 1800mm |
| 电动液压泵站/Electric hydraulic power unit | |||
| 电动机/Motor | 2×75kW三相电机/Three-phase motor | ||
| 冲击/推进/钻臂/Impact/Feed/Positioning |
轴向变量柱塞泵 Axial variable displacement piston pump |
||
| 回转/Rotation | 齿轮泵/Gear pump | ||
| 过滤精度/Filter fineness | 10 μ | ||
| 液压油箱/Hydraulic oil tank | 400L | ||
| 液压冷却器/Hydraulic cooler | 水冷却器/Water cooler | ||
| 工作电压/Working voltage | 380V | ||
| 频率/Frequency | 50Hz | ||
| 启动方式/Starting method | 星-三角/Star-triangle | ||
| 电缆卷盘/Cable reel | 1×CRC1016 | ||
| 卷盘容缆量/length of reel cabling | 100m | ||
| 风水路系统/Ai人& water system | |||
| 空压机/Air compressor | 1×JN11 |
润滑耗油量 Oil consumption of lubrication |
2×180-250 g/h |
| 排量/Capacity of air compressor | 1.55m³/min | ||
| 压力/Pressure | 8 bar | 水泵/Water pump | 1×CR15 |
|
纤尾润滑装置 Device of shank lubrication |
电子脉冲润滑泵 Electronic pulse lubrication pump |
功率/Power | 11kW |
|
润滑耗气量 Air consumption of lubrication |
2×0.3m³/min |
水泵排量 Capacity of water pump |
12m³/h |
| 底盘/Chassis | |||
|
柴油机 Diesel engine |
Cummins QSB3.9-C125 /93kW/2200rpm |
行走制动 Travelling braking |
桥内湿式制动器 Wet bridge brake |
|
尾气净化 Exhaust purification |
尾气催化器 Exhaust catalyst |
驱车制动 Parking braking |
机械制动器 Mechanical brake |
|
传动系统 Drive system |
液力变矩器+变速器 Hydraulic torque converter + gearbox |
燃油箱 Fuel tank |
120L |
Applications
Inquiry
